News

  • Manufacturing method of manual household quick mixer

    With the improvement of people's living standards, more and more families have begun to use a variety of mixers instead of traditional manual stirring methods to stir food. Blenders are beginning to enter more and more homes. They are cheaper, easier...

  • Commutator switch coil to control which direction the electromagnetic field points

    The working principle of DC motors is based on the interaction of the rotating armature magnetic field and the fixed stator magnetic field. When the positive pole of the armature is attracted to the negative pole of the stator (and vice versa), a for...

  • Commutator section and corresponding armature coil provide voltage

    The commutator itself is a split ring, and generally, each end of the ring is connected to each end of the armature coil. If the armature has multiple coils, the commutator will also have multiple segments, one for each end of each coil. Carbon brush...

  • How to choose the grease viscosity of the commutator

    Viscosity is a key physical and chemical index. If the viscosity of the engine oil is properly selected, it will reduce the internal friction of the grease, which will cause damage to the surface layer of the commutator drive gear and reduce the nois...

  • What is the other name of the motor commutator

    Maybe you don't know that there are other names for the motor commutator, today I will talk about it. In fact, this name is what we often say, but it is not as common as it is, which is what we commonly call commutator. It is a component of a DC perm...

  • Reasonable use of commutator is the last word

    The commutator segments in the commutator are actually not numbered, but for the needs of the bias wiring, and for the convenience of recording at any time, we will add numbers for the commutator segments in four cases. 1.Number of the commutator whe...

  • Application rule of commutator in liquid flow standard device

    With the increasing shortage of energy, people pay more and more attention to saving energy, thus attaching importance to the measurement of energy, of which the measurement of thermal energy has been greatly developed. The accuracy test of the heat ...

  • How to carry out maintenance on the commutator collector ring and its electrical equipment

    During the inspection, the collector ring should be inspected carefully: whether the surface of the collector ring is smooth, whether there are burn marks, vertical marks, etc .; the outer layer of the collector ring insulation layer should be proper...

Contact us