How to install the shaft-mounted geared motor is mainly described here by explaining the installation relationship between the geared motor and the working machine, the connection between the geared motor and the working machine, and the installation of the anti-torque bracket. to install.
1. The installation relationship between the geared motor and the working machine
In order to avoid the deflection of the main shaft of the working machine and the additional force on the bearing of the reducer, the distance between the reducer and the working machine should be as small as possible without affecting the normal work, and its value is 5-10mm.
2. The connection between the geared motor and the working machine
The reducer is directly fitted on the main shaft of the working machine. When the reducer is running, the reaction torque acting on the reducer body is balanced by the anti-torque bracket installed on the reducer body or by other methods. Attached to the fixed bracket.
3. Installation of the anti-torque bracket
The anti-moment bracket should be installed on the side of the reducer facing the working machine, and the manufacturer uses a commutator armature to reduce the bending moment attached to the working machine shaft. Elastomers such as rubber are used for the shaft sleeve at the coupling end of the anti-torque support and the fixed support to prevent deflection and absorb the generated torque fluctuations.